AMD Ryzen 7 2700X CPU Cooler Cooler Master HYPER 212 BLACK EDITION Reviews - EagleK Review

Recent

Post Top Ad

Post Top Ad

Sunday, March 3, 2019

AMD Ryzen 7 2700X CPU Cooler Cooler Master HYPER 212 BLACK EDITION Reviews

 
The Pinnacle Ridge X models, including the AMD Rygen 7 2700X, come with a fairly consistent performance and lace prism bundle cooler with brilliant RGB LED tuning. The cooler master HYPER 212 BLACK EDITION is the cooler master.
 
 
The cooling performance of the AMD Wrath Prism Bundle Cooler is also fairly well within the bundle. It is based on the size of the small blade and the high RPM, so noise is somewhat disturbed during use. The tower type air-cooled CPU cooler with four heatpipes has good caustic ratios from $20, but the HYPER 212 BLACK EDITION is about $50, which is not a good product. It features all-black luxury paint and design, and a low-noise 120mm fan cooler. 
 
 
 
 
 
 
It supports various latest CPU sockets including AM4 socket, and should be compatible with case used with height of 158.8mm. 
 
 
 
 
 
 
Various parts are made to fit in various kinds of sockets. The impressive part is that it includes a clip for dual fan mounting and a Y-split cable as standard. 
 
 
 
 
 
 
The cover is made of high quality so that the heat pipe end is not exposed directly, and the aluminum heat sink is also clean with a black paint. The fan cooler LED is not installed.
 
 
 
 
 
 
 
The base is made up of the heat pipe directly touching the CPU, and even the heat pipe is painted so that the copper color is not exposed. 
 
 
 
 
 
Thermal grease is supplied as a syringe type, but it is applied with NT-H1. 
 
 
 
 
 
 
Back plate - Main board - Stand off - It is composed of the coupling method of the cooler body, so it can be installed without difficulty even when the case is standing up. It is thought that anyone can install or replace the cooler without difficulty. However, in order to secure the heat sink, the fan must be removed and then joined again using the clip.
 
 
 
 
 
 
The bundle fan, which has low noise and high wind pressure, has a maximum RPM range of 800 ~ 2000RPM, which is somewhat higher than that of a general air-cooled cooler. The specification can confirm the wind pressure of 2.9mm H2O in 43CFM air volume.
 
 
 
 
 
 
It is the state that it is attached to the main system which is in use. Black and white parts make up a very clean appearance. It has good compatibility because it does not interfere with the memory with the heat sink. 
 
 
 
 
 
 
 The amount of noise I measured during the CPU stress test. The AMD Race Prism Cooler is set to LOW mode and operates at a maximum of 2800RPM, and the cooler master HYPER 212 BLACK EDITION model, which operates at 2000RPM, is somewhat quiet.
 
 
 
 
RPM is lower, but with four heatpipes and a tower heatsink structure, cooling performance is higher. The room temperature is about 20 degrees. In the environment where the side panel is opened, the children and the maximum temperature are lowered by about 2 degrees, and the noise is further reduced, so that the desired shape can be constructed.
 
Especially when the BIOS is set as a separate setting, it is dynamically set to RPM of 20% when the temperature is lower than 60 degrees, and when the CPU temperature is higher than this, the speed is changed. When the AMD wrath prism bundle cooler is used, Even after playing the video, the fan speed of the CPU cooler is constantly changing, but I changed it to Cooler Master HYPER 212 BLACK EDITION. As cooling performance improves somewhat, we also expect to use PBO functionality in game or video rendering situations.

There are products of $20 in the same lineup, and there are products of $30 equipped with dual fan, but if you are looking for the profound sensibility of All Black, you can be satisfied with the product. End the reviews.

1 comment:

  1. It’s hard to find knowledgeable people about this topic, and you seem like you know what you’re speaking about! Thanks geekforpc.com

    ReplyDelete

Post Bottom Ad